CTS Sedan RWD V6-3.0L (2010)
7. Using the J 45689 (1) insert the probe end into the two small openings of the plastic quick joint.
8. Remove both quick joint clamps.
9. Disconnect both A/C lines.
10. Remove the IP Carrier. Refer to Instrument Panel Carrier Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Carrier Replacement)Instrument Panel Carrier Replacement (Right Hand
Drive) (See: Application and ID).
11. Remove the air inlet assembly.
12. Disconnect the HVAC module electrical connector.
13. Disconnect the HVAC module drain tube (2) from the floor.
14. Press the tab and release the left rear duct from the HVAC module.
15. Disconnect the left rear heater duct from the HVAC module.
