CTS Sedan RWD V6-3.0L (2010)
Note: Lubricate a NEW O-ring seal (1) with silicon free engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications).
1. Install the following NEW components to the fuel injectors. Use steps 2 through 8 to install these components.
*
Upper O-ring Seal (1)
*
Plastic Spacer (2)
*
Retaining Ring (3)
*
Isolator Cup (5)
*
Teflon Seal (6)
2. From the EN-48266 - Installer , position the EN 48266-1 to the injector tip.