CTS Sedan RWD V8-6.2L SC (2010)
6. Position the propeller shaft (1) in the rear differential flange (2).
7. Align the reference marks on the propeller shaft (1) and the differential drive flange (2).
Note: If reusing the propeller shaft bolts, to ensure proper adhesion and fastener retention, the threads must be free of debris prior to the
application of threadlocker. Use the appropriate cleaner, thoroughly clean the threads and allow to dry.
8. Apply threadlocker to the threads of the bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Fluid Type Specifications
).