CTS Wagon AWD V6-3.6L (2010)
2. Turn OFF the ignition, for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
11. Install the fuel pipe shield. Refer to Fuel Pipe Shield Replacement (LF1) (See: Fuel Supply Line/Service and Repair/Fuel Pipe Shield
Replacement)Fuel Pipe Shield Replacement (LLT) (See: Fuel Supply Line/Service and Repair/Fuel Pipe Shield Replacement).
12. Install the low side fuel pressure service port cap.
13. Install the fuel tank cap.
