CTS Wagon AWD V6-3.6L (2010)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor Replacement
Rear Wheel Speed Sensor Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Brakes and Traction Control/Service Precautions/Technician Safety Information/Brake Dust
Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
3. Remove the wheel speed sensor wire harness clips (1) from the upper control arm and vehicle frame.
4. Disconnect the wheel speed sensor electrical connector (2).