CTS Wagon RWD V6-3.6L (2010)
Bearings and Joints/Drive/Propeller Shaft/Service and Repair)Rear Propeller Shaft Replacement (RPO LLT/LF1with MX7 or MN6) (See:
Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair)Rear Propeller Shaft
Replacement (RPO LLT, LF1 with MXO) (See: Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair).
24. Install the exhaust system. Refer to Exhaust System Replacement (LSA) (See: Engine, Cooling and Exhaust/Exhaust System/Service and
Repair/Exhaust System Replacement)Exhaust System Replacement (LF1) (See: Engine, Cooling and Exhaust/Exhaust System/Service and
Repair/Exhaust System Replacement)Exhaust System Replacement (Single) (See: Engine, Cooling and Exhaust/Exhaust System/Service and
Repair/Exhaust System Replacement (Single))Exhaust System Replacement (LLT) (See: Engine, Cooling and Exhaust/Exhaust System/Service
and Repair/Exhaust System Replacement).
25. Install the rear wheels. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
26. Lower the vehicle.
27. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brakes and Traction Control/Brake
Bleeding/Service and Repair)Hydraulic Brake System Bleeding (Pressure) (See: Brakes and Traction Control/Brake Bleeding/Service and Repair
).
28. Align the vehicle. Refer to Wheel Alignment Measurement (See: Maintenance/Alignment/Service and Repair/Wheel Alignment Measurement).
