CTS Wagon RWD V6-3.6L (2010)
Power Mirror Motor: Service and Repair
Outside Rearview Mirror Motor Replacement
Removal Procedure
1. Remove the mirror face. Refer to Outside Rearview Mirror Glass Replacement (See: Service and Repair/Outside Rearview Mirror Glass
Replacement).
2. Remove the screws (2).
3. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
2. Align the motor to the mirror assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the screws (2) and tighten to 1 Nm (9 lb in).
4. Install the mirror face. Refer to Outside Rearview Mirror Glass Replacement (See: Service and Repair/Outside Rearview Mirror Glass
Replacement).
