CTS Wagon RWD V6-3.6L (2010)
Note: If the assist handle bracket interferes with the washer (1) and nut (2) remove the bracket. If the nut (2) is separated from the washer (1)
during removal, it cannot be reinstalled. A new nut with washer would be required. If the nut is separated and not replaced it may create a creak in
the roof area.
5. Remove the fasteners (1) from the underside of the side rail (2).
6. Remove the side rail (2) from the vehicle.
Installation Procedure
1. When replacing the luggage carrier it is necessary to transfer all components.