CTS Wagon RWD V6-3.6L (2010)
7. Install the sunshade to the cable guides tabs (1) located at each end of the cross bar (2).
8. Push each end of the sunshade cable guides tabs into the ends of the sunshade until they locked in place.
9. Remove the suitable tool (1) from the sunshade cam locking hole (2).
10. Ensure that the sunshade cam (2) is fully seated in the bracket (3) and the sunshade slides smoothly.
11. Verify the operation of the sunshade.
12. Install the rear sunroof window. Refer to Sunroof Window Replacement - Rear (See: Sunroof / Moonroof Panel/Service and Repair/Sunroof
Window Replacement - Rear).
