CTS Wagon RWD V6-3.6L (2010)
6. Slide the sunroof window (1) to the right side under the roof flange. This will allow the left edge of the sunroof window to be lifted high enough to
clear the top side of the roof panel.
7. Remove the sunroof window from the vehicle.
Installation Procedure
Note: Use masking tape to tape off the sunroof opening. Do Not scratch the roof with the sunroof window brackets on the bottom side of the
sunroof window.
1. Position the rear sunroof window into the roof opening.
2. Install the left side of the sunroof window (1) under flange until the right side clears the sunroof module opening.
3. Position the sunroof window brackets into the module.