CTS Wagon RWD V6-3.6L (2010)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Bracket Replacement
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
1. Place the ignition switch in the OFF position.
2. Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement (See: Body and Frame/Spoilers, Flaps, and
Air Dams/Air Dam/Service and Repair/Front Compartment Sight Shields Replacement).
3. Release the brake clips from the vehicle front frame (1).
4. Release the brake pipe clips (1) from the right side engine compartment side rail.
