CTS Wagon RWD V6-3.6L (2010)
*
Thoroughly clean the residue from the guide pin bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the guide pin threads by using denatured alcohol or equivalent and allow to dry.
12. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488), or equivalent to 2/3 of the threaded length of the brake caliper guide pin bolts.
Ensure there are no gaps in the threadlocker along the length of the filled area of the bolts.
13. Allow the threadlocker to cure approximately 10 minutes before installation.
14. Install the brake caliper to the caliper bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
15. Using a backup wrench on the brake caliper guide pins, install the brake caliper guide pin bolts (1) and tighten to 63 Nm (46 lb ft).
16. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
