CTS Wagon RWD V6-3.6L (2010)
8. Remove the brake caliper guide pins (1) and seals (2).
Installation Procedure
1. Inspect the brake caliper guide pins, seals and brake pad springs for damage and/or corrosion. Refer to Rear Disc Brake Mounting and Hardware
Inspection (See: Testing and Inspection/Rear Disc Brake Mounting and Hardware Inspection).
2. Apply a thin coat of high temperature silicone brake lubricant the brake caliper guide pins.
3. Install the brake caliper guide pins (1) to the guide pin seals (2).
Ensure the guide pin seals are fully seated in the groove of the brake caliper guide pins.
4. Install the brake caliper guide pins and seals to the brake caliper bracket.
Ensure the guide pin seals are fully seated in the groove of the brake caliper bracket.
