CTS Wagon RWD V6-3.6L (2010)
5. Tighten the upper and lower brake caliper bracket bolts to 135 Nm (100 lb ft).
6. Install the brake pad springs (1).
7. Install the inner brake pad (1).
8. Install the outer brake pad (2).
Note: If reusing the caliper bracket bolts the threads of the caliper bracket bolts and the threads of the knuckle mounting holes must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
9. Prepare the bolts and the threaded holes for assembly:
*
Thoroughly clean the residue from the bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the threaded holes by using denatured alcohol or equivalent and allow to dry.
*
Apply threadlocker GM P/N 12345493 (Canada P/N 10953488), or equivalent to 2/3 of the threaded length of the lower caliper bracket bolts.
Ensure there are no gaps in the threadlocker along the length of the filled area of the bolts.
