CTS Wagon RWD V6-3.6L (2010)
9. Remove the brake caliper and support with heavy mechanics wire or equivalent.
10. Remove the outer brake pad (1).
11. Remove the inner brake pad (2).
12. Remove the brake pad springs.
Installation Procedure
1. Inspect the brake caliper guide pins, seals and brake pad springs for damage and/or corrosion. Refer to Front Disc Brake Mounting and Hardware
Inspection (See: Testing and Inspection/Front Disc Brake Mounting and Hardware Inspection).
2. Install the brake pad springs.
3. Install the outer brake pad (1).
4. Install the inner brake pad (2).
Note: If reusing the brake caliper guide pin bolts, the threads of the brake caliper guide pin bolts and the threads of the guide pins must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
