CTS Wagon RWD V6-3.6L (2010)
3. Install the inner brake pad (1).
4. Install the outer brake pad (2).
5. Pivot the brake caliper (1) into position.
Note: If reusing the brake caliper guide pin bolt, the threads of the brake caliper guide pin bolt and the threads of the guide pin must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
6. If reusing the caliper pin bolt, prepare the bolt and the guide pin for assembly:
*
Thoroughly clean the residue from the guide pin bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the guide pin threads by using denatured alcohol or equivalent and allow to dry.
7. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488), or equivalent to 2/3 of the threaded length of the brake caliper guide pin bolt.
Ensure there are no gaps in the threadlocker along the length of the filled area of the bolt.
8. Allow the threadlocker to cure approximately 10 minutes before installation.
