CTS Wagon RWD V6-3.6L (2010)
Note: The upper brake caliper guide pin is equipped with a bushing.
5. Apply a thin coat of high temperature silicone brake lubricant the brake caliper guide pin.
6. Install the upper brake caliper guide pin (1) to the guide pin seal (2).
Ensure the guide pin seal is fully seated in the groove of the brake caliper guide pin.
7. Install the upper guide pin and seal to the brake caliper bracket.
Ensure the guide pin seal is fully seated in the groove of the brake caliper bracket.
8. Install the brake pad springs.
9. Install the outer brake pad (1).
10. Install the inner brake pad (2).
Note: If reusing the brake caliper guide pin bolts, the threads of the brake caliper guide pin bolts and the threads of the guide pins must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
11. If reusing the caliper pin bolts, prepare the bolts and the guide pins for assembly:
