CTS Wagon RWD V6-3.6L (2010)
3. Hand install the lower brake caliper bolt (1) and the upper brake caliper bolt (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Tighten the brake caliper bolts to 130 Nm (96 lb ft).
5. Assemble the brake hose fitting bolt (1) and the 2 new brake hose fitting gaskets (2) to the brake hose (3)
6. Install the brake hose assembly to the brake caliper and tighten the brake hose fitting bolt to 49 Nm (36 lb ft).
7. Install the brake pads. Refer to Front Disc Brake Pads Replacement (JE5, J55 (RWD)) (See: Disc Brake System/Brake Pad/Service and
Repair/Front Disc Brake Pads Replacement (JE5, J55))Front Disc Brake Pads Replacement (JE5, J55 (AWD)) (See: Disc Brake System/Brake
Pad/Service and Repair/Front Disc Brake Pads Replacement (JE5, J55))Front Disc Brake Pads Replacement (J56) (See: Disc Brake
System/Brake Pad/Service and Repair/Front Disc Brake Pads Replacement (J56)).
8. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
