CTS Wagon RWD V6-3.6L (2010)
5. Assemble the brake hose (2), the NEW copper brake hose gaskets (3), and the brake hose fitting bolt (4) to the brake hose.
6. Install the brake hose fitting bolt to the brake caliper (1) and tighten to 49 Nm (36 lb ft).
7. Install the brake hose retainer (2) to the rear frame bracket.
8. Connect the crossover brake pipe fitting (1) to the intermediate brake hose assembly (3) and tighten to 18 Nm (13 lb ft).
9. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
