CTS Wagon RWD V6-3.6L (2010)
4. Install the BPMV bracket nuts (1) and tighten to 12 Nm (106 lb in).
5. Position the washer solver container and install the fasteners. Refer to Windshield Washer Solvent Container Replacement (With CE4) (See:
Wiper and Washer Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent Container Replacement (With CE4)
)Windshield Washer Solvent Container Replacement (Without CE4) (See: Wiper and Washer Systems/Windshield Washer Reservoir/Service
and Repair/Windshield Washer Solvent Container Replacement (Without CE4)).
6. Install the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair).
7. Install the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
8. Lower the vehicle.
9. Install the BPMV assembly bracket bolt (1) and tighten to 12 Nm (106 lb in).