CTS Wagon RWD V6-3.6L (2010)
5. Install the park cable guides (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the park brake cable guide bolt (1) to the floor panel and tighten to 10 Nm (89 lb in).
7. Install the park brake cable guide nut (3) to the mounting stud and tighten to 10 Nm (89 lb in).
8. Connect intermediate park brake cable housing (1) to the floor panel bracket (3).
9. Seat the intermediate park brake cable housing retainer to the floor panel.
10. Insert the intermediate park brake cable into the cable retaining bracket and lock the intermediate park brake cable into place.
11. Connect the intermediate park brake cable connector (1) to the front park brake cable.
12. Lower the vehicle.
13. Cycle the park brake pedal 1 or 2 times.
