CTS Wagon RWD V6-3.6L (2010)
Note: When installing the rear frame assembly, ensure the park brake cable does not become trapped between the frame mount and the vehicle
body.
9. Install the rear frame assembly. Refer to Rear Frame Replacement (See: Body and Frame/Frame/Subframe/Rear Subframe/Service and Repair).
10. Install the rear brake hose assembly bracket to the studs.
11. Install the nuts (1) to the rear brake hose assembly bracket and tighten to 10 Nm (89 lb in).
12. Install the bolt (1) securing the fuel and brake pipe bundle to the vehicle underbody and tighten to 10 Nm (89 lb in).