CTS Wagon RWD V6-3.6L (2010)
5. Reposition the radiator inlet hose clamp (1) at radiator using J 38185 - Hose Clamp Pliers.
6. Remove the radiator inlet hose (2) from the radiator.
7. Remove the radiator inlet hose from the vehicle.
Installation Procedure
1. Install the radiator outlet hose to the vehicle.
Note: Lubricate the inside diameters of the hoses with clean coolant prior to installation.
2. Reposition the radiator outlet hose clamp (1) at radiator using J 38185 - Hose Clamp Pliers.
3. Install the radiator outlet hose (2) from the radiator.