CTS Wagon RWD V6-3.6L (2010)
15. The EN-48313 is now properly installed to hold the timing chain in position.
Note: Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
16. Mark the timing chain and the respective locations on camshaft position actuators (15-18).
17. Remove the camshaft position actuator bolt.
18. Remove the camshaft bearing caps and the camshaft. Refer to Camshaft Removal - Right Side (See: Service and Repair/Overhaul/41. Camshaft
Removal - Right Side).
Installation Procedure