CTS Wagon RWD V6-3.6L (2010)
2. Align the location mark (3) of the engine mount (1) to the engine mount bracket (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the upper engine mount retaining nut and tighten to 80 Nm (59 lb ft).
4. Install the engine mount and engine mount bracket as an assembly.
5. Install the engine mount bracket bolts (1) and tighten to 60 Nm (44 lb ft).
6. Raise the rear section of the frame.