CTS Wagon RWD V6-3.6L (2010)
1. Install the oil filter adapter.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the bolts securing the wire harness bracket to the oil filter adapter.
1. Tighten the large wire harness bracket bolt to 23 Nm (17 lb ft).
2. Tighten the small wire harness bracket bolt to 10 Nm (89 lb in).
3. Install the A/C compressor with the A/C pipes to the engine. Refer to Air Conditioning Compressor Replacement (LF1, LLT) (See: Heating and
Air Conditioning/Compressor HVAC/Service and Repair/Removal and Replacement)Air Conditioning Compressor Replacement (LSA) (See:
Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal and Replacement).
4. Lower the vehicle.