CTS Wagon RWD V6-3.6L (2010)
4. Remove and discard the oil filter cartridge.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
6. Place a suitable drain below the oil pan drain plug.
7. Remove the oil pan drain plug.
8. Allow the oil to drain completely.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the oil pan drain plug and NEW O-ring seal and tighten to 25 Nm (18 lb ft).
2. Lower the vehicle.
