CTS Wagon RWD V6-3.6L (2010)
Intake Manifold: Service and Repair
Lower Intake Manifold Replacement
Lower Intake Manifold Replacement (LP1, LY7)
Removal Procedure
1. Turn the ignition OFF.
2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LP1, LY7) (See: Powertrain Management/Fuel Delivery
and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement)Fuel Injector Sight Shield Replacement (LLT) (See:
Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
3. Remove the air outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LF1) (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair)Air Cleaner Outlet Duct Replacement (LLT) (See: Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair).
4. Note the booster hose routing. Disconnect the brake booster check valve and hose from the brake booster.
5. Reposition the brake booster hose to the intake manifold.
