CTS Wagon RWD V6-3.6L (2010)
Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Exhaust) , Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank
2 (Left Side) Intake (See: Variable Valve Timing/Variable Valve Timing Solenoid/Service and Repair/Camshaft Position Actuator Solenoid
Valve Solenoid Replacement - Bank 2 (Left Side) Intake) , and Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left
Side) Exhaust (See: Variable Valve Timing/Variable Valve Timing Solenoid/Service and Repair/Camshaft Position Actuator Solenoid Valve
Solenoid Replacement - Bank 2 (Left Side) Exhaust).
17. Remove the engine front cover with the water pump. Refer to Engine Front Cover Removal (See: Service and Repair/Overhaul/15. Engine Front
Cover Removal).
18. Disassemble the engine front cover. Refer to Engine Front Cover Disassemble (See: Service and Repair/Overhaul/77. Engine Front Cover
Disassemble).
Important: Do NOT use sharp and/or metal gasket scrapers in order to clean the sealing surfaces.
19. Carefully clean the engine front cover sealing surfaces. Refer to Engine Front Cover Cleaning and Inspection (See: Service and
Repair/Overhaul/78. Engine Front Cover Cleaning and Inspection).
Important: Insert a piece of cardboard between the oil pan front and the oil pump in order to prevent any contaminants from falling into
the oil pan.
20. Carefully clean the engine front cover sealing surfaces. Refer to Engine Front Cover Cleaning and Inspection (See: Service and
Repair/Overhaul/78. Engine Front Cover Cleaning and Inspection).
21. Use compressed air in order to remove any engine coolant from the engine cooling passages and from the top of the oil pan scraper (windage tray).
Installation Procedure
1. Assemble the engine front cover. Refer to Engine Front Cover Assemble (See: Service and Repair/Overhaul/79. Engine Front Cover Assemble).
