CTS Wagon RWD V6-3.6L (2010)
19. Connect the heater outlet hose (1) using J 38185 .
20. Install the IP carrier. Refer to Instrument Panel Carrier Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Carrier Replacement)Instrument Panel Carrier Replacement (Right Hand
Drive) (See: Application and ID).
21. Install the battery. Refer to Battery Replacement (See: Starting and Charging/Battery/Service and Repair/Removal and Replacement).
22. Fill the coolant. Refer to Cooling System Draining and Filling (Static Fill LF1, LLT) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair/Cooling System Draining and Filling (Static Fill))Cooling System Draining and Filling (Static Fill LSA) (See: Engine, Cooling and
Exhaust/Cooling System/Service and Repair/Cooling System Draining and Filling (Static Fill))Cooling System Draining and Filling (GE 47716
LSA) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Cooling System Draining and Filling (GE 47716))Cooling System
Draining and Filling (GE 47716 LF1, LLT) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Cooling System Draining and
Filling (GE 47716)).
23. Evacuate and recharge the AC system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging).
24. Leak test the fittings of the component using J 39400-A .
