CTS Wagon RWD V6-3.6L (2010)
Alignment: Service and Repair
Front Caster and Camber Adjustment
Front Caster and Camber Adjustment (RWD)
Special Tools
*
J 45845 Caster and Camber Adjusting Tool
*
J-45845-10 Caster and Camber Adjusting Rod
1. Install the J 45845 or the J-45845-10 to the lower control arm and the frame.
2. Loosen the front and rear lower control arm to frame nuts and bolts.
3. Adjust the camber angle by turning the turnbuckle on J 45845 or the J-45845-10 until the specifications have been met.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Tighten the front control to frame bolt to 200 Nm (148 lb ft).
5. Tighten the rear control arm to frame bolt to 320 Nm (236 lb ft).
6. Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications (See: Specifications/Wheel Alignment Specifications
).
7. Adjust the rear toe. Refer to Rear Toe Adjustment (See: Rear Toe Adjustment).
