CTS Wagon RWD V6-3.6L (2010)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Outlet Pipe/Hose Replacement
Power Steering Gear Outlet Pipe/Hose Replacement (V6, Left Hand Drive, Rear Wheel Drive)
Removal Procedure
1. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
2. Remove the front compartment lower noise shield. Refer to Front Compartment Lower Noise Shield Replacement (All Wheel Drive) (See: Body
and Frame/Splash Guard/Service and Repair/Front Compartment Lower Noise Shield Replacement)Front Compartment Lower Noise Shield
Replacement (Rear Wheel Drive) (See: Body and Frame/Splash Guard/Service and Repair/Front Compartment Lower Noise Shield Replacement
).
3. Remove the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair).
4. Place drain pans under the vehicle as needed.
5. Remove the power steering gear inlet hose latch plate bolt.