CTS Wagon RWD V6-3.6L (2010)
11. Remove the transmission fluid cooler pipes (1) from the transmission, and position aside. Refer to Transmission Fluid Cooler Hose/Pipe
Replacement (With VO3) (See: Transmission Fluid Cooler Hose/Pipe Replacement (With VO3))Transmission Fluid Cooler Hose/Pipe
Replacement (Without VO3) (See: Transmission Fluid Cooler Hose/Pipe Replacement (Without VO3)).
12. Remove and discard the O-rings. Do NOT reuse the O-rings.
13. Plug the open outlet ports to prevent fluid loss and contamination.
14. Remove the transmission close out plug (1).
15. Mark the torque converter to flexplate/flywheel orientation to ensure proper realignment.
16. Remove the starter motor. Refer to Starter Replacement (LF1/LLT) (See: Starting and Charging/Starting System/Starter Motor/Service and
Repair)Starter Replacement (LSA) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair).
