CTS Wagon RWD V6-3.6L (2010)
Note: Ensure clearance is maintained between the transmission and the following:
*
The wiring harness
*
The vent tube
*
The cooler pipes
1. Using the transmission jack, carefully raise the transmission to the engine.
2. Align the transmission with the engine dowels.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the transmission mounting bolts and tighten to 50 Nm (37 lb ft).
4. Position the engine wiring harness (1) to the original location.
5. Install the wiring harness retainers (2) to the transmission.
