CTS Wagon RWD V6-3.6L (2010)
22. Remove the wiring harness retainers (2) from the transmission.
23. Position the transmission wiring harness (1) and vent tube out of the way.
24. Remove the transmission mounting bolts (1-6).
25. Pull the transmission free from the engine dowels.
Note: Ensure clearance is maintained between the transmission and the following:
*
The wiring harness
*
The vent tube
*
The cooler pipes
26. Carefully lower the transmission from the vehicle.
27. Flush the transmission oil cooler if necessary. Refer to Transmission Fluid Cooler Flushing and Flow Test (See: Maintenance/Fluids/Fluid -
A/T/Testing and Inspection).
Installation Procedure
