CTS Wagon RWD V6-3.6L (2010)
Transmission Position Switch/Sensor: Service and Repair
Shift Control Linkage Replacement
Shift Control Linkage Replacement (Rear Wheel Drive)
Removal Procedure
1. Position the shift lever in PARK.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
3. Remove the nut from the shift control linkage rod.
4. Disconnect the shift control linkage rod from the shift control assembly.
5. Remove the manual shift shaft nut.
6. Remove the shift control linkage from the vehicle.