CTS Wagon RWD V6-3.6L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: In steps 2 through 5, leave all the bolts loose to aide in the alignment of all the suspension components prior the to tighten to the final
torque specifications.
2. Install the lower control arm to frame mounting bolt (1) and nut (2) and tighten to 165 Nm (122 lb ft).
3. Install the rear coil spring from the lower control arm. Refer to Rear Spring, Insulator, and Jounce Bumper Replacement (See: Suspension Spring
( Coil / Leaf )/Service and Repair/Rear Suspension Coil Spring).