CTS Wagon RWD V6-3.6L (2010)
11. Remove the knuckle from the vehicle.
Installation Procedure
1. Position the knuckle on the lower control arm
2. Install the lower control bolt. Refer to Lower Control Arm Replacement (See: Control Arm/Service and Repair/Rear Suspension/Lower Control
Arm Replacement).
Important: It maybe necessary to adjust the jack stand in order to install the upper control arm bolt.
3. Install the upper ball joint in the knuckle. Refer to Upper Control Arm Replacement (See: Control Arm/Service and Repair/Rear
Suspension/Upper Control Arm Replacement).
4. Install the lower shock absorber bolt. Refer to Shock Absorber Replacement (See: Suspension Strut / Shock Absorber/Service and Repair/Rear
Suspension Shock Absorber).
5. Install the trailing arm bolt. Refer to Trailing Arm Replacement (See: Trailing Arm/Service and Repair).
6. Install the adjustable link. Refer to Adjust Link Replacement (See: Steering/Tie Rod/Service and Repair/Rear Suspension).
