CTS Wagon RWD V6-3.6L (2010)
Clutch Disc: Service and Repair
Clutch Assembly Replacement (CTS)
Removal Procedure
1. Remove the manual transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Aisin AY6 - Manual Transmission/Transmission Replacement).
2. Remove and discard the clutch pressure plate bolts.
3. Remove the clutch pressure plate and driven disc from the dowel pins on the flywheel.
Installation Procedure
Note: When the clutch driven plate requires replacement, the engine flywheel must also be replaced along with the clutch pressure plate as an assembly.
1. The splined portion of the driven plate protrudes out of the plate more on one side than the other. The side that protrudes out more is the
