CTS Wagon RWD V6-3.6L (2010)
2. Install the concentric actuator cylinder (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 3 concentric actuator cylinder bolts (1) and the quick connect bolt (5).
*
Tighten the 3 concentric actuator cylinder bolts to 20 Nm (15 lb ft).
*
Tighten the quick connect bolt to 10 Nm (89 lb in).
4. Install the transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Aisin AY6 - Manual Transmission/Transmission Replacement)