CTS Wagon RWD V6-3.6L (2010)
Important: Apply a small amount of clean oil on the threads of the DT-48060-A .
Important: Check the bore of the bushing for any damage. If there is any damage found, cracks, etc., replace the differential assembly.
4. Using the DT-48060-A , remove the differential housing support bushing.
Installation Procedure
1. Using the DT-48060-A , install the differential housing support bushing.
2. Install the insulator (1) on the rear differential assembly (2).
3. Install rear differential assembly. refer to Differential Replacement ().
4. Remove the support and lower the vehicle.
