CTS Wagon RWD V6-3.6L (2010)
14. Install a NEW carrier cover O-ring into the groove.
15. Apply a light coat of gear lube to the O-ring area.
16. Align the bolt holes and push cover onto the differential carrier evenly.
17. Start the cover bolts in the holes by hand.
18. Install the side cover mounting bolts (1) and tighten to 29 Nm (21 lb ft) in a criss-cross pattern.
19. Install the drain plug. Refer to Axle Lubricant Change (W/O Differential Cooler) (See: Fluid - Differential/Service and Repair/Removal and
Replacement)Axle Lubricant Change (With Differential Cooler) ().
20. Install the carrier into the vehicle. Refer to Differential Carrier Assembly Replacement (See: Differential Carrier/Service and Repair).
21. Fill the differential with fluid. Refer to Front Axle Lubricant Replacement (See: Fluid - Differential/Service and Repair/Removal and
Replacement).
Output Shaft Seal Replacement - Right Side
Output Shaft Seal Replacement - Right Side
Special Tools