CTS Wagon RWD V6-3.6L (2010)
Flywheel: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement (All Wheel Drive) (See: Automatic Transmission/Transaxle/Sensors and Switches
- A/T/Transmission Position Switch/Sensor/Service and Repair/Transmission Replacement)Transmission Replacement (Rear Wheel Drive) (See:
Automatic Transmission/Transaxle/Sensors and Switches - A/T/Transmission Position Switch/Sensor/Service and Repair/Transmission
Replacement).
2. Remove the engine flywheel bolts and the flywheel..
3. Clean and inspect the flywheel. Refer to Engine Flywheel Cleaning and Inspection (Automatic Transmission) (See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Overhaul/54. Engine Flywheel Cleaning and Inspection/Engine Flywheel Cleaning and Inspection (Automatic
Transmission))Engine Flywheel Cleaning and Inspection (Manual Transmission) (See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Overhaul/54. Engine Flywheel Cleaning and Inspection/Engine Flywheel Cleaning and Inspection (Manual Transmission)). If the flywheel
teeth are damaged, inspect the starter for proper operation. Replace the starter if you find excessive wear or damage to the starter drive. Refer to
Starter Replacement (LF1/LLT) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter Replacement (LSA) (
See: Starting and Charging/Starting System/Starter Motor/Service and Repair).
Installation Procedure