DeVille V6-260 4.3L DSL (1985)
FIGURE 2 - POSITION #12
FIGURE 3 - POSITION #13
FIGURE 8- INSULATOR BRACKET ASSEMBLY
5.
Install rubber insulators, see Figure 8 for part identifications, with slits up toward body floorpan, at positions #11, #12 and #13, see Figures 1,
2 and 3. It may be convenient to use one wrap of friction tape over the rubber insulator to keep the insulators in place until the support
brackets can be reinstalled.
NOTE:
It may be necessary to slide stone guard coils on pipes either way from position #11 in order to install rubber insulator on pipes.
6.
Reinstall parking brake cable support brackets which were removed in step #2, being careful to center rubber insulator above bracket.
