DeVille V6-260 4.3L DSL (1985)
PROCEDURE 9. NO "HI" MODE
PROCEDURE 10. BLADES CYCLE IN AND OUT OFPARK POSITION WHEN WIPER IS OFF
PROCEDURE 11 - MOTOR END COVER REPLACEMENT
1.
Check motor grounds. If ground is poor, install ground clip (P/N 22048623).
2.
Check armature for open circuit.
3.
Check circuit breaker for intermittent open.
4.
Check brush plate assembly for restricted brush to commutator contact.
5.
Replace motor end cap, P/N 22038791.
To replace motor end cap:
