DeVille V8-252 4.1L VIN 8 FI (1983)
Ignition Control Module: Technical Service Bulletins
HEI Module - Updated Testing Information
Bulletin No. I 83-68
File In Group
6D
Number
17
Date
April '83
HEI MODULE TESTING
FIGURE 1 - Grounding The HEI Modular Tester
FIGURE 2 - Top View Of The HEI Module
Known good HEI modules and new modules from service stock may fail a test using the HEI tester, J-24642, if the tester ground is improperly
connected. When using the tester, connect or contact the alligator clip for the tester ground directly to the flat metal surface on the bottom of the HEI
module (refer to Figure 1 and 2). The metal eyelet on the module is not always in contact with the metal ground surface on the bottom of the module and,
therefore, should not be used when testing the module.