DeVille V8-4.6L VIN 9 (1995)
2.
Remove the inside door handle trim plate/bezel (2).
2.1.
Between the top edge of the inside door handle trim plate/bezel and the door trim panel, carefully insert the plastic trim tool and gently pry
the inside door handle trim plate/bezel outward far enough to disengage the retaining clips.
2.2.
Pull the door handle trim plate/bezel outward and slide over the handle
2.3.
Disconnect the electrical connector (1).
3.
Use the door trim pad clip remover, J 38778, to disengage the upper rear corner map pocket retaining clip (3).
4.
Remove the two door trim panel retaining fasteners (2).
^
Behind the upper rear corner of the map pocket.
^
Behind the door handle trim plate/bezel.
Important:
If the door trim panel hooks are damaged during removal, a hook repair kit with instructions, J 42983, is available.
5.
Remove the upper trim panel (shark fin) and the door trim panel (1) together by LIFTING upward and outward in onier to disengage the panel
hooks from the door.
6.
Disconnect the door trim panel speaker electrical connector.
