DeVille V8-4.6L VIN 9 (1995)
Cruise Control Servo: Service and Repair
Servo Unit
1. Disconnect cruise control cable at retainer.
2. Disconnect vacuum hoses and electrical connector.
3. Remove mounting bracket and nut, then servo and bracket assembly.
4. Remove servo retaining screws, then servo.
5. Reverse procedure to install, noting the following:
a. Torque servo to bracket screws to 12 inch lbs.
b. Torque mounting bracket nut and bolt to 13 ft. lbs.
c. Adjust cruise control cable as outlined.
