cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Catalytic Converter Over Temperature Alarm|Page 10805 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Audible Warning Device: Component Tests and General Diagnostics
Catalytic Converter Over Temperature Alarm

The Catalytic Converter Alarm Module is powered (at terminal C1/C) through Trunk Compartment Fuse A11 and CKT 139 when the ignition is in RUN,
BULB TEST or START. The module is grounded at terminal C1/A through CKT 150 at ground G301. The module monitors the output signal of the
Catalytic Converter Over Temperature Sensor at terminal C2/B through CKT 1790. When the module detects that the catalytic converter temperature has
reached 810°C (1490 F) it sounds an alarm using the Catalytic Converter Alarm Speaker.

Catalytic Converter Over Temperature Alarm|Page 10805 > < Initial Inspection and Diagnostic Overview