cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Customer Interest for Electronic Brake Control Module:|535012|Page 135 > < ABS Main Relay|Description and Operation|Page 129
Page 1
background image

Electronic Brake Control Module: Customer Interest
ABS - Antilock Indicator ON with No DTC Set

FILE IN SECTION: 5 - Brakes

BULLETIN NO.: 53-50-12

DATE: June, 1995

SUBJECT:
Anti-Lock Indicator "On" with No DTC Set (Replace EBTCM or Repair EBTCM Connector)

MODELS:
1995 Cadillac Concours, DeVille, Eldorado, Seville

CONDITION

Some owners may comment that the anti-lock indicator turns "On" intermittently. "No Traction Control" Diagnostic Trouble Codes (DTC's) may be set.

CAUSE

The harness connector of the Electronic Brake and Traction Control Module (EBTCM) has a shorting bar. This bar grounds the anti-lock indicator
circuit whenever the harness is disconnected from the EBTCM. A grounded shorting bar causes the anti-lock indicator to turn "On", informing the driver
that the ABS is disabled.

Important: 

The shorting bar is an essential safety feature that should NOT be modified in any manner.

The following conditions may cause the EBTCM shorting bar to short to ground when the connector appears to be secure.

1. A loose or poorly seated EBTCM harness connector may cause this condition. (Improper seating of the harness connector to the EBTCM may

damage connector terminals).

2. There is a plastic "boss" or "finger" molded into the header connector of the EBTCM that inserts into the shorting bar when the connector is

properly seated. It prevents the shorting bar from shorting. The condition described in this bulletin may occur if this plastic boss is:

^

Broken, or

^

Moved to one side of the shorting bar (as opposed to being inserted in the clip).

CORRECTION

Customer Interest for Electronic Brake Control Module:|535012|Page 135 > < ABS Main Relay|Description and Operation|Page 129